![]() ![]() If not, you’ll need to use a wall anchor to secure the cube storage on the second side. ![]() ![]() Use your measuring tape to see if there’s a second stud the appropriate distance away from the first. When you locate a stud, make a mark with a pencil. Start by measuring the cube storage unit, then use your stud finder to see if there are studs where you want to drill. To secure a wood cube storage unit to the wall, you’ll need to gather the proper tools, including a level, drill, screws, screwdriver, drywall anchors, brackets, a stud finder, a pencil, and measuring tape. For example, use 2” screws if wood is 1” thick. Insert wood screws twice as long as the wood’s thickness. Add drywall anchors if wall studs are not available, although this may decrease the cube’s weight capacity. These points should be approximately 1” inside each corner. Drill holes through the cube and into the wall stud at four points. If using just screws, position your cube and make sure it is level. Line bracket holes up with the holes drilled in the wall and secure with 1 ½” screws. Locate wall studs, position cube, check it is level, and mark the location. For example, if the wood is 1” thick, use ¾” screws. Make sure the screw length is slightly shorter than the wood’s thickness. Lay an L-bracket flat on the back of the cube bottom on each of the two edges. To hang your cube storage with brackets, identify the bottom edge and place it facing up. When securely attached to your wall, a wood cube storage system can display heavier objects without the worry of collapsing or tipping over. Secure cube storage to a wall by using a bracket system or screws. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |